Identify the maker of your taps Correctly identifying the brand of your old tap hardware will ensure your Easytap replacement spindle fits properly in your original tap body, with the original handles and flanges, if you wish to retain them. A: If you know your tap brand (such as Dorf, Irwell, etc) then simply find  the same model in our product list. B: If you are unsure as to the brand of your original tap model then you will have to remove your existing tap spindle and measure it. Then consult the product list to find the matching unit. Contact us on 08 9470 9666 if you have trouble identifying the replacement unit for your original taps. (Installation must comply with Plumbing regulations and by-laws) 1. Turn off the main switch.( Near water metre)  2. Unscrew the nut from the handle top.  3. Pull out the handle.  4. Remove the flange. 5. Remove the old tap spindle and washer.  6.     (Make sure there is no any objective including 7.     the temporary tap seat inside of the tap body). 8. You do not need to reseat if you use Easyseal 9. Screw in Easytap spindle body firmly and   10.     make sure it sealed with tap seat properly. 11. Screw on Easytap spindle locknut.  12. Turn on the main water supply.       *You must separate the locknut      before install Easytap spindle. Installation Guide